product speci? cations in this catalog are subject to change without notice.request our product speci? cations before purchase and/or use. please use our products based on the information contained in this catalog and product spe ci? cations. downsized psg psf conductive polymer aluminum solid capacitors ? super low esr, high ripple current capability ? endurance: 2,000 to 5,000 hours at 105 ? ? rated voltage : 16 to 20v dc ? rohs compliant ? halogen free specifications (at 20 ? , 120hz) (at 105 ? ) (at 20 ? after 2 minutes) (at 20 ? , 120hz) (at 100khz) category temperature range rated voltage capacitance tolerance surge voltage leakage current *note dissipation factor (tan ) low temperature characteristics (max.impedance ratio) endurance bias humidity test surge voltage test failure rate items - 55 to +105 ? 16 to 20v dc p20% (m) rated voltage(v)b1.15 i=0.2cv or 500a, whichever is greater where, i : leakage current (a), c : nominal capacitance (f), v : rated voltage (v) 0.12 max. z( - 25 ? )/z(+20 ? ) ? 1.15 the following specifications shall be satisfied when the capacitors are restored to 20 ? after the rated voltage is applied for 5,000 hours (20v : 2,000 hours) at 105 ? . appearance no significant damage capacitance change ? ? 20% of the initial value d.f. (tan ) ? the initial specified value esr ? 150% of the initial specified value leakage current ? the initial specified value the following specifications shall be satisfied when the capacitors are restored to 20 ? after subjecting them to dc voltage at 60 ? , 90 to 95% rh for 1,000 hours. appearance no significant damage capacitance change ? ? 20% of the initial value d.f. (tan ) ? the initial specified value esr ? 150% of the initial specified value leakage current ? the initial specified value the capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105 ? for 30 seconds through a protective resistor(r=1 k
) and discharge for 5 minutes 30 seconds. appearance no significant damage capacitance change d.f. (tan ) esr leakage current 0.5% per 1,000 hours maximum (confidence level 60% at 105 ? ) characteristics *note : if any doubt arises, measure the leakage current after the following voltage treatment. voltage treatment : dc rated voltage is applied to the capacitors for 120 minutes at 105 ? . z( - 55 ? )/z(+20 ? ) ? 1.25 ? ? 20% of the initial value ? the initial specified value ? 150% of the initial specified value ? the initial specified value new! radial lead cat. no. e1001l (1/2)
product speci? cations in this catalog are subject to change without notice.request our product speci? cations before purchase and/or use. please use our products based on the information contained in this catalog and product speci? cations. part numbering system supplement code size code capacitance tolerance code capacitance code (ex. 150 ? f:151) lead forming taping code terminal code voltage code (ex. 16v:160,20v:200) series code category a p s g e s m 134 2 6 7 8 9 10 13 12 518 17 16 11 15 14 standard ratings ?? : enter the appropriate lead forming or taping code. please refer to product code guide (conductive polymer type) dimensions [mm] marking size code d d f d' l' f05 0.45 f08 6.3 2.5 h06 h08 8.0 0.6 3.5 hb5 jb5 10.0 5.0 l+1.5max. l+1.0max. d+0.5max. coated case l' 15min. 4min. d' d f ? 0.5 f ? 0.5 coated case l' 15min. 4min. d' d f05,f08,h06,h08 hb5,jb5 g 6d6 150 16 v ex) 16v150f ? terminal code : e wv(v dc ) 16 20 150 270 270 470 560 820 1,000 6.3 5 6.3 8 8 6 8 8 8 11.5 10 11.5 10 11.5 20 15 22 16 14 12 12 3,200 3,800 3,300 4,000 4,970 5,400 5,400 apsg160e ?? 151mf05s apsg160e ?? 271mf08s apsg160e ?? 271mh06s apsg160e ?? 471mh08s apsg160e ?? 561mhb5s apsg160e ?? 821mjb5s apsg160e ?? 102mjb5s 120 6.3 5 20 3,200 apsg200e ?? 121mf05s cap( ? f) case size d l (mm) esr (m
max. /20 ? , 100 k to 3 00khz) rated ripple current (marms/105 ? , 100khz) part no. conductive polymer aluminum solid capacitors n e w! radial lead cat. n o. e1001l (2/2)
|
